Model
# 091-182-230-12
The
Super 16 Auto Eject is a completely sealed automatic shoreline
disconnect. This prevents contamination of the mechanism by road dirt,
and ensures long reliable life even when mounted in the most severe
environment. A novel plug detector closes and opens the 230 Volt A.C.
circuit after the mating connector is inserted, and before the
connector is ejected. This eliminates arcing at the connector contacts,
and assures long contact life. As with all Auto Ejects, the Super 16
Auto Eject is connected to the starter circuit, so that ejection occurs
when the engine is cranked.
- 16A, heavy duty pin and sleeve contacts provide reliable connection over years of insertion/eject cycles
- 3 pin, 240V configuration
- IEC 60309 standard European connector provided
- Smooth sculpted cover, no sharp edges
- Eject actuation voltage 12V
- Upon sensing engine start, plug ejects from receptacle and away from vehicle path; eliminating dangerous severing of cord
- Auto Eject energizing is delayed until detector pin senses plug is inserted, eliminating terminal arcing
- After eject, magnetized weatherproof cover snaps into position over inlet
- Weatherproof back enclosure with watertight cable fittings protects mechanism from road contamination
- 2 year warranty
Input: 12 Vdc
Output Connector Voltage: 230 Vac
Output Connector Current: 16 Amps
Weight: 5 lbs
Warranty: 2 Years
Datasheet.pdf (655 Kb)
Instruction Manual.pdf (433 Kb)
Product Specifications, 12 Vdc.doc (1.7 Mb)
Product Specifications, 24 Vdc.doc (1.7 Mb)
3D Drawing - IGS File (6.4 Mb)
|
